Unpacking - MAHLE Digital ADAS 2.0 Manual De Instalación

14
Digital ADAS 2.0
Installation manual
6.2

Unpacking

Tools needed:
Scissors
n
List of Accessories in the boxes
Box A:
1x Digital ADAS CPU (A1)
n
2x laser rangefinders DLM-01 (A2)
n
1x wireless keyboard (A3)
n
Box B:
1x ADAS quick coupling trolley (B1)
n
1x wheel hub target kit (B2)
n
2x laser rangefinder mounts (B3)
n
adjustable feet kit + screws kit (B4)
n
digital target knobs (B5)
n
1x bar fixing screws kit (B6)
n
2x side bar covers (B7)
n
Box C:
1x radar target (if included) (C1)
n
1x ADAS handle kit (C2)
n
1x Digital ADAS cover (C3)
n
1x graduated bar cover (C4)
n
1x Magnetic Stripe (C5)
n
Box D:
2x half-bars
n
1x half-bar junction plug
n
Removing the packaging
1 Place the pallet in the place chosen
for installation
2 Open the box and remove the pack-
aging carton
Cut the straps fastening the pre-
3
assembled structure to the pallet
4 Take out all components
5 Open the accessory boxes
6 Remove the contents from the boxes
and place it on a flat surface
7 Open the box containing the metric
bar
8 Take out the metric bar components
and place them on a flat surface