Installation - monzana MZH2000 Manual Del Usuario

5.2 INSTALLATION

Model MZH2000
Note: The number of angle brackets varies depending on the
model.
1. Mark the holes for the drillings. (Pay attention to the correct
position and angle).
2. Drill the holes for the dowels using a Ø 8mm drill bit.
3. Attach the angle bracket to the wall using the
supplied mounting material.
4. Mount the hinge of the radiant heater, with
the mounting material to the wall bracket.
5. Set the desired radiation angle and tighten the
screws.
17
Model MZH3000
www.DEUBAXXL.de