Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2. Lower exhaust muffler: Using exhaust removal pliers, remove rubber hangers at (2) locations. Be sure to support exhaust before removing rubber hangers. Gently
pull the bumper fascia rearward to lower the exhaust.
3. Remove foam pads: Using flat head screwdriver, remove (2) foam pads from side frame rails, per side, see Figure 2.
©2021 Horizon Global™ Corp - Printed in Mexico
Sheet 5 of 18
76513NP
09-01-21
Rev. A
Publicidad
Tabla de contenido
