Horizon Global 76513 Instrucciones De Instalación página 6

foam pads removed in step 3. Raise the hitch into position and align it with weldnut location. Loosely install M12 bolts ① and ½'' conical washers ②, see Figure 1.
4. Install hitch: Using channellock, slightly bend the end of rod located behind end panel outward, both sides, see Figure 2. Using wire brush, clean the weldnuts behind
5. Tighten all M12 fasteners with torque wrench to 76 Ft.-Lb. (103 N*M).
6. Reinstall the exhaust muffler and bezels.
©2021 Horizon Global™ Corp - Printed in Mexico
Proper torque is needed to keep the hitch secure to the vehicle when towing.
Sheet 6 of 18 76513NP 09-01-21 Rev. A