camry Premium CR 7932 Manual De Uso página 6

DESCRIPTION OF THE DEVICE: CR7935 insecticidal lamp
1. Handle
2. Hook
3. Top ring
4. Bottom of insecticide lamp
5. High voltage grid
6. Lower lampshade
7. LED diode for charging process control
8. Ultra UV LED 595nm lamps for insect killing
9. LED lamps 360-395 nm for lighting a tent or outdoors
10. USB type B socket for charging the built-in battery
11. Switch
PRINCIPLE OF OPERATION OF AN INSECT LAMP
The device attracts insects with ultraviolet light (8) with an ULTRA UV 595nm wavelength. The light source is wrapped in a special high
voltage grid (5) in front of the light source. High voltage flowing through the grid causes electric shock to insects and leads to their death. A
soft click is heard, dead insects fall to the bottom of the insecticide lamp (4), which must be emptied regularly.
The method of use is important for performance.
Recommended lamp height is 1.5 meters as optimal for moths and 1.0 meter for mosquitoes. Placing the device in a darker place has a
positive effect on the efficiency, because the sun's rays weaken the radiation strength of UV diodes. Turn on the device before turning on
the light or suddenly turn off all strong lights for 10-20 minutes.
FEATURES: CAMPING LAMP & INSECT KILLING LAMP
Place the device on the table top or hang the device by the built-in hook (2) in the desired location, inside the tent, in the carport or outside.
1. Pressing the switch (11) for the first time will simultaneously activate the 595nm ultra UV LED insect killings lamps (8) and the 360-395
nm LED lamps for tent lighting or outdoor use (9).
2. Pressing the button (11) for the second time will turn off the illumination of the lower shade (6), i.e. turn off the 360-395 nm LED lamps
for lighting the tent or for outdoor use (9).
3. Pressing the button (11) for the third time will turn off the 595nm ultra UV LED insect killing lamps (8).
CLEANING AND MAINTENANCE
1. Before cleaning or maintenance, switch off the device from the power supply and the switch (11).
2. Do not use chemical cleaning agents for cleaning. The device is waterproof, however, do not wet clean the device. Clean the high
voltage grid (5) with a brush to get rid of the remains of insect bodies.
3. Regularly clean the bottom of the lamp (4) from bodies of dead insects by tilting the lamp and spilling them.
4. Make sure the device is completely dry before switching it on again.
TECHNICAL DATA
High voltage on grid: 1000V
Lifetime of the light sources 8.000 hours
Rated output power: DC 5 V 1 A
Battery capacity: 2000mAh
Charging time: 4 hours
Working time: 10-16 hours
Power: 2W
IPX4 - housing resistant to rain and moisture.
Den Pappkarton im Altpapier entsorgen
Recycling zu einer offiziellen Sammelstelle bringen, da es gefährliche Substanzen enthält, die die Umwelt gefährden können. Das
Gerät sollte in einer Form abgegeben werden, die eine weitere Nutzung unmöglich macht. Wenn es Batterien enthält, sollten diese
rausgenommen und separat an einer Sammelstelle abgegeben werden. Das Gerät darf nicht in den Hausmüll rausgeworfen werden
.
Polyäthylenbeutel (PE) in dem Behälter für Kunststoff entsorgen. Das abgenutzte Gerät zum
6
!!