MADER LSE1200 Manual Del Usuario página 50

STEP 5: Attach Log Cradles
1. Attach the log cradle B (59 #) to the beam using hex bolt M10x25 (60 #) and nylon lock nut M10 (54
#) tighten with two 17 mm wrenches.
2. Attach the log cradle A (62 #) to the beam using hex bolt M10x25 (60 #) and nylon lock nut M10 (54
#) tighten with two 17 mm wrenches.
STEP 6: Attach Protective Covers and Connection Plate
1. Attach the protective cover A (64 #) and protective cover B (82 #) to the beam using hex socket pan
head screw M8x20 (63 #) and nylon lock nut M8 (14 #) tighten with a 13 mm wrench.
2. Connect protective cover A (64 #) and protective cover B (82 #) using connection plate (79 #), fix
connection plate (#79 #) using hex bolt M6x12 (80 #), flat Washer Ø6 (47 #) and nylon lock nut M6
(81 #) tighten with two 10 mm wrenches.
3. Tighten all hardware