MADER LSE1200 Manual Del Usuario página 55

If a log gets stuck, embedded or will not split completely, push the control lever in the reverse direction
and allow the splitter to strip the log from the wedge.
If the log still remains stuck, embedded or will not split, turn the machine off and use a sledge hammer
and crow bar to remove the log.
ALWAYS keep hands clear of the log and wedge while it is retracting.
15.
Improper maintenance and storage of the log splitter
Regularly grease axle and wheel bearing area or when needed.
After the wheel bearings have been greased make sure the axle nuts and pins are in place and
secure.
Per