Technical Specifications - Microlife OXY 210 Manual Del Usuario

 Accessories and wearing parts: Battery.
Should guarantee service be required, please contact the
dealer from where the product was purchased, or your local
Microlife service. You may contact your local Microlife
service through our website:
www.microlife.com/support
Compensation is limited to the value of the product. The
guarantee will be granted if the complete product is
returned with the original invoice. Repair or replacement
within guarantee does not prolong or renew the guarantee
period. The legal claims and rights of consumers are not
limited by this guarantee.
6

13. Technical Specifications

Type: Fingertip Pulse Oximeter OXY 210
Display: OLED display
Display range: Oxygen saturation: 35 - 100 %
Pulse rate: 25 - 250 bpm
Resolution: Oxygen saturation: 1 %
Pulse rate: 1 bpm
Measurement Oxygen saturation:
precision: ±2 % (70 - 100 %)
No requirement: (≤ 69 %)
Pulse rate: ± 2 bpm
Alert range:
Oxygen saturation: Upper limit: 50 - 100 %
Lower limit: 50 - 100 %
Pulse rate: Upper limit: 25 - 250 bpm
Lower limit: 25 - 250 bpm
Alert error: Oxygen saturation: ± 1 % of the
preset value
Pulse rate: the greater of ± 10% of
the preset value and ± 5 bpm
PI (Perfusion Index)
Weak PI Min. 0.2 %
Operating conditions: 5 - 40 °C / 41 - 104 °F
15 - 80 % relative maximum humidity
Storage conditions: -10 - +50 °C / 14 - 122 °F
10-93 % relative maximum humidity
Automatic switch-off: Automatically shut down in
10±2 seconds, when no or low
signal is detected.
Battery: 2 x 1.5 V alkaline batteries; size
AAA
Battery lifetime: approx. 30 hours (using new
batteries)
Weight: 42.5 g (including batteries)
Dimensions: 62 x 37 x 32 mm
IP Class: IP22
Reference to EN ISO10993-1/-5/-10;
standards: IEC 60601-1; EN 60601-1-2;
ISO 80601-2-61; EN 62304;
EN 60601-1-6
Expected service life: 5 years (when used 15 times/day;
20 minutes for each measure-
ment)
Technical alterations reserved.