IP Cleaning GS 2/62 EXT Traducción De Las Instrucciones Originales página 13

- Don't pick up water from sink or tub. Do not use cleaner as a pump to clean out
clogged drains, sinks, or other plumbing fixtures. The vacuum cleaner is intended for
vacuuming air and water mixtures.
- Do not use or pick up aggressive soaps, they could damage the appliance.
WARNING: The float valve has the function to stop the vacuuming when
the tank is full of liquids or in case of overturning; carry out cleaning
routine checking that there are no damages and change it if it's neces-
sary.
- WARNING: Do not use outdoors or in a cold environment.
- Do not run the pump dry.
- After operating, when the pump is off, press the tap lever to relieve the machine from
pressure.
- After each use, empty the tank and fill it with 1/2 liter of clean water. Let the machine
run in order to thoroughly rinse the pump. Also thoroughly rinse the flexible hose.
- To correctly use soaps and detergents, follow the instructions reported on the
products, including the use of personal protective equipment (if required).
NOISE
Values measured according to EN 60704-1 (1997) / EN 60704-2-1 (2001) ISO 3744
standards.
The sound pressure level weighted A of the appliance is Lp
VIBRATIONS
Hand-arm vibrations on the suction hose are less than 2,5 m/s² as recommended by
ISO 5349-1
Under adverse network conditions, the appliance may cause temporary drops in volt-
age.
IMPORTANT INFORMATIONS ABOUT OPTIONAL VERSIONS:
Appliance with floor head additional socket (optional)
The socket -X- it is designed to connect a floor head.
WARNING: Maximum power allowed is 200W.
Don't connect electrical floor brushes with a bigger load. This may result
in a fire hazard or electric shock.
COMPONENT DESCRIPTION (PAGE 52-53)
EXTERNAL TANK
A - Red motor switch
A1 - Green pump switch
A3 - Quick coupling (INTAKE)
A4 - Quick coupling (OUTTAKE)
B - Cloth filter
C - Motor head
D1 - External tank
E - Tank
E1 - Market trolley
F - Inlet
G - Flexible hose
=77,5 dB; Kp =2,5 dB.
A A
ENGLISH
13