IP Cleaning GS 2/62 EXT Traducción De Las Instrucciones Originales página 14

ENGLISH
H - Hydrolytic hose
Y - Hose
Z - Float valve
X - Additional socket (OPTIONAL)
INTERNAL TANK
A - Red motor switch
A1 - Green pump switch
A3 - Quick coupling (INTAKE)
B - Cloth filter
C - Motor head
D - Detergent's tank with liquid valve
E - Tank
F - Inlet
G - Flexible hose
I1 - Tilting trolley
H - Hydrolytic hose
Y - Hose
Z - Float valve
X - Additional socket (OPTIONAL)
ASPIRATION ACCESSORIES - STANDARD/OPTIONAL
M - Aluminium/plastic hose (2 pcs)
P - Handle
M1 - Double bent hose Issa (OPTIONAL)
T - Round brush
T1 - PVC Brush (OPTIONAL)
V - Crevice tool
M2 - PVC Reduction
S - Issa dust brush
S2 - Issa brush for carpets (OPTIONAL)
S1 - Issa squeegee floor tool
EXTRACTION ACCESSORIES - STANDARD/OPTIONAL
I - Upholstery tool
P1 - Handle (OPTIONAL)
W - Carpet tool 2 nozzles (OPTIONAL)
W1 - Brush for washing floors 4 nozzles (OPTIONAL)
Q - Carpet tool
R - Liquid front device
DUST SUCTION (PAG 55)
-
Remove the container with liquid valve D (if foreseen) (pic.1)
-
Insert cloth filter B into the tank E (pic.2)
-
Mount the motor head C on the tank E and lock it with hooks (pic.3)
-
Insert the flexible hose G into inlet F (pic.4)
-
Insert at the other hose end handle P and extension tubes M or M1 (pic.5)
-
Connect the most suitable accessory (S-S2-T-T1-V)
-
Start suction by pushing the red push button A, after correctly plugging in the device (pic.6)
-
Examples of use as a vacuum cleaner for dust (pics. 7-8-9-10-11)
-
If a paper filter is available, insert it into the tank adjusting it on the deflector (pic.12).
LIQUID SUCTION (PAG 55)
-
Remove the cloth filter B from the tank E (pic.13)
-
For models with internal clean water tank, insert the tank provided with water valve D (pic.14)
-
For models with external clean water tank, apply the float cage equipped with the float under the
motorhead (fig.30)
-
Mount the motor head C on the tank by inserting hose Y in the suitable opening of tank D and clasp
the hooks (pic.15)
-
Insert flexible hose G into inlet F (pic.4)
14