Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
-
Insert at the other hose end handle P and extension tubes M or M1 (pic.5)
-
Insert at the end of extension tube the wet tool S1 or the carpet tool Q and apply the liquid front device
R (pics.16-17) to intake liquids from floors.
-
Start suction by pushing the red push button A, after correctly plugging in the device (pic.6)
-
Example of use as a vacuum cleaner for liquids (pic.18)
CLEANING WITH INJECTION-EXTRACTION SYSTEM (PAG 55)
-
Remove cloth filter B from the tank E (pic.13)
-
Pour water into the external tank D1 or into the tank with liquid valve D (pic.19) and, for the models with
internal tank, place it into the tank E (Pic.14)
-
Mount the motor head C on the tank by inserting hose Y in the suitable opening of tank D and clasp
the hooks (pic.15).
-
For models with external clean water tank join the connector Y1 to the quick coupling A4 placed on the
motorhead - INTAKE- (pic.20)
-
Insert flexible hose G in the suction inlet F (pic.4)
-
Insert at the hose end handle P1 and extension tubes (W-W1) (pic. 24)
-
Connect little hose K to the little hose H and N with the tap's front union (pics. 21-23)
-
Insert the end of H at the quick coupling A3 located on head C - OUTTAKE - (pics. 22-23)
-
Fasten hoses H-N with suitable clips (pic.24)
-
Start pump with green switch A1 – 1 minute ON / 1 minute OFF – and motor with red switch A, after
correctly plugging in the device (pic.6)
-
Push the tap's lever in order to let the accessory on the surface to be cleaned glide towards you (pic.25)
-
After the running, release the tap's lever and repeat the operation after lifting and removing the
accessory (pic.26)
-
If you wish to clean tissues or armchairs, remove from handle P1 the extension and remove hose N
from the tap. Insert the upholstery tool I linking the hose with the tap's front union (pic.27). In order to
start washing, put the opening on the tissue, push the tap and pull it towards you.
-
Example of use of opening I (pic.28)
ATTENTION: CLEAN REGULARLY THE FLOAT -Z- PLACED INSIDE THE PURIFYING BUCKET -D-
(pic.29) OR INSIDE THE FLOAT CAGE (pic.30) SO THAT IT CAN FREELY MOVE IN ITS HOUSING.
REGULARLY CHECK WHETHER THERE ARE ANY SIGNS OF DAMAGE.
ENGLISH
15
Publicidad
Tabla de contenido
