Loewe ARS RS232/IR-Link Instrucciones De Montaje página 15

3. Installation of the ARS RS232/IR-Link L2712
MOS components
Avoid damage from electrostatic charging.
Observe the rules for handling MOS components.
Procedure
Fig. 2
In the rest of the installation instructions "RS232/IR-Link" is referred to simply as "mo-
dule".
Fig. 3
1
2
15
Mount the holder (3) with the screw (5).
Plug the cable harness (6) into the
RS232/IR-Link module (1).
In fi g. 3 opposite, the installation site of
the module is marked by an arrow.
The necessary breakthroughs (arrow 1
and arrow 2) in the metal frame must be
opened using a suitable tool (separate
holding tabs, remove cover).
This now looks like the illustration
opposite in fi g. 3.