Connecting Ac Power - Brandt BCD510USB Manual De Instrucciones

USING BATTERIES (not supplied)
The unit can be powered by the batteries alone.
1. Remove the battery compartment cover.
2. Insert eight C size batteries with the + and – marks correctly aligned.
3. Replace the battery compartment cover.

CONNECTING AC POWER

1. Connect the supplied power cord to the AC INPUT socket on the unit and to the wall socket.
2. To switch off the unit completely, discon
If the unit is idle for 15 minutes, it will automatically switch to Power Saving mode.
Press the PLAY/PAUSE button to resume.
CD/MP3 PLAYER
PLAYING A DISC
You can play commercially available audio CDs:
CD-Recordable (CD-R)
CD-Rewritable (CD-RW)
MP3 -CD
1. Set the power switch to the ON position.
2. Set the FUNCTION selector to the AUX/USB/CD mode.
3. Press on the top of the unit to open the CD compartment.
4. Place a CD with the printed side facing up.
5. Press again to close the CD compartment.
The player scans the CD and the total number of tracks
PLAYING MUSIC FILES FROM USB
1. Insert a USB memory into the USB port
2. Set the FUNCTION selector to the
The player scans the USB device and the total number of tracks shows on the display.
3. In CD mode, press and hold
GENERAL OPRATION
1. Press / CD / USB. Play starts from the first track.
2. Adjust the desired volume by turning VOLUME control.
3. To pause, press
4. To stop, press
.
5. For mp3 files with folders,
- Press to skip forward by 10 tracks.
- Press and hold
then press
nect the power cord from the wall socket.
.
AUX/USB/CD
/ CD / USB to switch from CD to USB mode.
/ CD / USB. To resume, press it again.
to show the current folder, the current folder name will flash on the display, and
repeatedly to select the desired folder.
shows on the display.
mode.
EN-4