Power On/Off; Video Recording - Wiseup GL1400 Guia Del Usuario

All manuals and user guides at all-guides.com
-1× USB Cable
-1× AC110-230V to DC 5V Charging Adapter
-1× 8GB Micro SD Card (fitted into the Micro SD card slot already)
III. Operation
>> Please make sure your camera battery is fully recharged before using.
>> Please make sure the Micro SD card (4GB-32GB) has been formatted
already and is securely fitted into the camera's SD card slot, or it will not work. A
SDHC Class 10 Micro SD card is recommended.
[Note]:
If no Micro SD card is fitted into the camera, the blue and red indicator lights will
be illuminated for one second and then turn off after flashing 3 times. The camera will
shut down automatically.

3.1. POWER ON/OFF

3.1.1. Power on the camera by pressing the Power Button for 2 seconds. The
blue and red indicator lights will be illuminated for 5 seconds, then the red
indicator light will turn off while the blue one will stay illuminated, indicating the
camera has entered into standby mode automatically.
3.1.2. Power off the camera by pressing the Power Button for 5 seconds. The
blue indicator light will flash 3 times at first, afterwards, both blue and red
indicator lights will flash 3 times and then turn off.
[Note]:
If it is in standby mode without any operation more than 1 minute, both blue and
red indicator lights will flash 3 times and then turn off. The camera will shut down
automatically.

3.2. VIDEO RECORDING

3.2.1. Power on the camera by pressing the Power Button for 2 seconds. The
blue and red indicator lights will be illuminated for 5 seconds, then the red
indicator light will turn off while the blue one will stay illuminated, indicating the
camera has entered into standby mode automatically.
3.2.2. Press the Video Recording Button for 3 seconds to record video. The blue
indicator light will flash 3 times and then turn off.
3.2.3. Press the Video Recording Button once to stop recording video. The blue