GB FREELOADER PRO Manual Del Usuario página 5

All manuals and user guides at all-guides.com
4. To charge hand held electrical devices from FreeLoader Pro
Important – First select the correct position of the Voltage
Selection Switch (1, Fig 5) for the device you would like to
charge.
If in any doubt please consult the owner's
manual that came with your device.
Generally all mobile phones, portable
game systems, PDA's, GPRS units and MP3
players use the 5.5v setting and SLR, video
camera batteries and some MP4 / DVD
players use the 9.5v setting. NOTE – Solar
Technology International Ltd cannot be held
responsible for damage caused to a device
by incorrect voltage selection or any other
misuse, how so ever caused.
Insert the USB end of the Master Cable into
the Power Out socket (5, Fig 1). Select the
correct adaptor tip, insert into the female end of the Master Cable and connect to your device.
The Power Halo LEDs A and C will glow RED to indicate power is fl owing from Freeloader Pro
to your device (Fig 5). Once Freeloader Pro's battery is
empty the LEDs will switch OFF .
NOTE – if your device is not supported by one of the adaptor tips in this pack you can connect
the USB sync / charge cable that was originally supplied with your device into Freeloader Pro's
Power Out socket (5, Fig 1).
CamCaddy CamCaddy
2
1
It is very important to correctly locate the battery to be charged into CamCaddy before
connecting CamCaddy to Freeloader Pro.
without a battery a warning LED (4, Fig 3) will glow RED and the Freeloader Pro should be
disconnected from CamCaddy.
Fig 6
9
5
6
4
2
If CamCaddy is connected to Freeloader Pro
4
C
1
Fig 7
7
3
8
10
Fig 5
A