Operation
Turning the TV On and Off
Press the POWER button on the remote control. You can also use the POWER button
on the TV.
It may take a while for your TV to power on.
N
Changing Channels
Using the Channel Buttons
❑
Press the CH
or CH
When you press the CH
N
sequence. You will see all the channels that the TV has memorized. (The TV must
have memorized at least three channels). You will not see channels that were
either erased or not memorized. See page 20 to memorize channels.
Using the Number Buttons
❑
Press the number buttons to go directly to a channel. For example, to select channel
"27", press "2", then "7".
For quick channel change, press the number buttons, then press the ENTERE
N
button.
Using the "
" Button
❑
The "
" button is used to select a channel over 100.
For example, to select a channel over 100, for channel 122, press "-", then "2", then "2".
Using the PRE-CH Button to select the Previous Channel
❑
1. Press the PRE-CH button. The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one channel,
N
then use the number button to select the second channel. Then use the PRE-CH
button to quickly alternate between them.
Adjusting the Volume
Using the Volume Buttons
❑
1. Press the VOL
Using the
MUTE Button
❑
At any time, you can cut off the sound using the
1. Press
MUTE button and the sound cuts off.
The
will displayed on the screen.
. To turn mute off, press the
VOL
button.
button to change channels.
or CH
button, the TV changes channels in
channel over 100, for channel 122, press "-", then "2", then "2".
or VOL
button to increase or decrease the volume.
MUTE button.
MUTE button again, or simply press the VOL
or
English - 1