Preparation Before Installing The Wall-Mount; How To Attach The Stand-Base; Using The Stand-Base - Samsung 4 Serie Manual Del Usuario

Preparation before installing the Wall-Mount

Case A. Installing the SAMSUNG Wall-Mount
1. Install the Wall Mount with a torque range of 15kgf·cm or less. Use care as the parts can be damaged if the torque is out of the
specified range.
. Accessory Kit contains Holder–Ring
Screw down the hole
N

How to attach the Stand-Base

Using the screws for securing the stand base and the TV, firmly attach the TV to the
stand base.
(The exterior of the set may be different fr om the picture.)
Warning
Firmly secure the stand to the TV before moving it, as the stand may fall and could
cause serious injury.
Two or more people should carry the TV. Never lay the TV on the floor because of
N
possible damage to the screen. Always store the TV upright.

Using the Stand-Base

Two or more people should carry the PDP. Never lay the PDP on the floor because of possible damage to the screen. Always keep
N
the PDP upright.
The PDP can rotate 20 degrees in right and left directions.
N
[②
] for installing other company's Wall-Mount on Samsung TV. (Case B)
[①
] when installing wall-mount on the wall.
Case B. Installing another company's Wall-Mount
English - 
When mounting your TV on a wall, install
the cover (➊) on the stand-base using two
screws.
-0° ~ 0°