Pc Display; Using Your Tv As A Computer (Pc) Display - Samsung 4 Serie Manual Del Usuario

Changing the Mode
❑
Turns on the D Effect. You can choose between Mode1 and Mode. To achieve the
3D effect, the 3D glasses shutter back and forth from the left to right and vice versa
(left/right sync).
• Off: Turns the 3D effect function off.
• Mode1: Mode 1 operates with right sync first.
• Mode: Mode 2 operates with left sync first.
• D: Picture is converted from D to D. Choose this to watch a D picture
when you are experiencing eyestrain.
If the 3D effect is not working properly, it means the Mode and 3D glasses may not
N
be syncing properly. To put them in sync, switch to the other mode.
Changing the Format
❑
Select the optimal input format to match your graphic cards or 3D software.
Checker Board: If the output format of your graphic card or 3D software is Checker
•
Board, select this input format.
• Horizontal: If the output format of your graphic card or 3D software is Horizontal
interleaved, select this input format.
• Vertical: If the output format of your graphic card or 3D software is Vertical
interleaved, select this input format.
Reset→OK/Cancel
❑
Resets all picture settings to the default values.
Select a picture mode to be reset. The reset is performed for each picture mode.
N

PC Display

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual screens on
your PC will probably be different, depending upon your particular version of Windows and your
particular video card. However, even if your actual screens look different, the same basic set-up
information will apply in almost all cases.
(If not, contact your computer manufacturer or Samsung Dealer.)
1. First, click on Control Panel on the Windows start menu.
. When the control panel window appears, click on Appearance and Themes and a display
dialog-box will appear.
. When the control panel window appears, click on Display and a display dialog-box will
appear.
4. Navigate to the Settings tab on the display dialog-box. The correct size setting (resolution)
Optimum: PL42B450B1 : 1024x768 pixels, PL50B450B1 : 1360x768 pixels
If a verticalfrequency option exists on your display settings dialog box, the correct value is 0
or 0 Hz. Otherwise, just click OK and exit the dialog box.
the Windows start menu.
English - 5
T V Picture Options
Color Tone : Normal
Picture
Size : 16:9
Digital NR : Off
HDMI Black Level : Normal
Sound
Film Mode : Off
Screen Burn Protection
Channel
3D Effect
Setup
Input
Move Enter
T V D Effect
Mode : Mode 1
Picture
Format : Checker Board
Sound
Channel
Setup
Input
Move Enter
T V Picture
Mode : Standard
Picture
Cell Light
Contrast
Brightness
Sound
Sharpness
Color
Channel
Tint (G/R) G 50
Advanced Settings
Picture Options
Setup
Reset : OK
Input
Move Enter
Continued...






Return
Return
8
95
45
50
50
R 50
Return