Locking The Controls; Over-Temperature Protection; Residual Heat Warning - amzchef YL-CD3201 Manual De Instrucciones

Cocina de vitrocerámica
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Locking the Controls

• You can lock the controls to prevent unintended use (for example children accidentally
turning the cooking zones on).
• When the controls are locked, all the controls except the ON/OFF control are disabled.
To lock the controls
Touch the child lock
Hint: the timer indicator will show the remaining time and "Lo" alternately every 5
seconds.
To unlock the controls
1. Make sure the ceramic hob is turned on.
2. Touch and hold the child lock
3. You can now start using your ceramic hob.
When the hob is in the lock mode, all the controls are disable except the
ON/OFF
emergency, but you shall unlock the hob first in the next operation.

Over-Temperature Protection

A temperature sensor equipped can monitor the temperature inside the ceramic hob. When
an excessive temperature is monitored, the ceramic hob will stop operation automatically.

Residual Heat Warning

When the hob has been operating for some time, there will be some residual
heat. The letter " H "appears to warn you to keep away from it.
Auto Shutdown
Another safety feature of the hob is auto shut down. This occurs whenever you forget to
switch off a cooking zone. When you forgot the turn off the hob,It will automatic shut down
according to timer and power levels. The default shutdown times are shown in
the table below:
Power level
Default working timer (hour)
control. The timer indicator will show"Lo".
for a 2seconds.
,
you can always turn the ceramic hob off with the ON/OFF
1
2
3
4
8
8
8
4
14
control in an
5
6
7
8
4
4
2
2
9
2

Publicidad

Tabla de contenido
loading

Tabla de contenido