amzchef YL-CD3201 Manual De Instrucciones página 16

6. Buzzer will beep for 30 seconds and the timer indicator
shows "- -" when the set time finished.
Setting the timer to turn one cooking zone off
1. Touching the heating zone selection control that you want to set the
timer for. (e.g. zone 2#)
2. Touch timer control, the minder indicator will start flashing and "30"
will show in the timer display.
3. Set the time by touching the "-" or "+" control of the timer
Hint: Touch the "-" or "+" control of the timer once will decrease or
increase by 1 minute.
Touch and hold the "-" or "+" control of the timer will decrease
increase by 10 minutes.
4. Touching the heating zone selection control, and then touch the "Timer", the timer is
cancelled, and the "--" will show in the minute display.
5.When the time is set, it will begin to count down immediately. The display will show the
remaining time and the timer indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator will illuminate
indicating that zone is selected.
6. When cooking timer expires, the corresponding
cooking zone will be automatically switch off and show "H".
16
or