One for All URC-7930 Guia Del Usuario página 5

All manuals and user guides at all-guides.com
Setting up the ONE FOR ALL 3
Before you start, please read these instructions carefully
Direct code set up
Example: To set up the ONE FOR ALL 3 for your television:
1
139
device is switched on (not on standby).
2
3
_ _ _ _
4
5
press POWER If your device switches off, the ONE
FOR ALL 3 is ready to operate your device.
6
7 If your device does not respond, follow steps 1 to 5 with
each code listed for your brand. If none of the codes listed
for your brand operate your device, or if your brand is not
listed at all, try the search method described on page 6.
Important notes:
WWW.ONEFORALL.COM
TV key
hold down M (MAGIC) key
(four-digit device code)
123 -
Make sure your
x2