Appearance / Name And Function Of Each Part; Printer Front (Takeup Side); Front Cover - SII IP-7700-02/03 Guía De Consulta Rápida

Appearance / Name and function of each part

This section shows the printer appearance and describes the name and function of each component.

Printer front (takeup side)

9
^
2
Lock
(ON)
4
1 Operation panel
2 Ink box cover
3 Tension bar guide
4 Caster
5 Pressure control knob

6 Front cover

7 Waste ink bottle unit
8 Cap cover
9 Wipe cover
0 Take-up direction switch
Media feed switch
-
Take-up reel switch
^ Media dryer fan
\ Protection bar

\
3
Unlock
(OFF)
Provided with LEDS and LCD to display printer status and keys to set functions.
An inlet to set ink (Note: Displayed as "INK COVER" on the LCD.)
The guide of bar to apply tension to the media
Unlocked to move the printer and locked to immobilize it.
A knob to switch the media press force
Must be closed during printing.
A unit to contain a waste ink bottle
Opened when cleaning the capping unit or replacing the wiper blade.
Opened when maintaining the print head (replacement/height adjustment).
A switch to select media takeup direction
A switch to feed media automatically
A switch to wind media automatically
A fan to dry ink after printing.
A bar to protect media surface just after the print.
6
3
1
8
5
7
0
-