Appearance / Name And Function Of Each Part; Printer Front (Takeup Side) - SII IP-7900-20 Guía De Configuración Rápida

Appearance / Name and function of each part

This section shows the printer appearance and describes the name and function of each component.

Printer front (takeup side)

9
$
2
3
Lock
<ON>
4
1 Operation panel
2 Ink box cover
3 Tension bar guide
4 Caster
5 Pressure control knob
6 Front cover
7 Waste ink bottle unit
8 Cap cover
9 Wipe cover
0 Take-up direction switch
Media feed / Take-up reel
!
switch
@ Footswitch connector
# Scroller
$ Media dryer fan
% Protection bar
30
All manuals and user guides at all-guides.com
%
Unlock
<OFF>
!
Provided with LEDS and LCD to display printer status and keys to set functions.
An inlet to set ink (Note: Displayed as "INK COVER" on the LCD.)
The guide of bar to apply tension to the media
Unlocked to move the printer and locked to immobilize it.
A knob to switch the media press force
Must be closed during printing.
A unit to contain a waste ink bottle
Opened when cleaning the capping unit or replacing the wiper blade.
Opened when maintaining the print head (replacement/height adjustment).
A switch to select media takeup direction
A switch to feed media automatically
A connector to connect optional Footswitch
A shaft to feed or wind media
A fan to dry ink after printing.
A bar to protect media surface just after the print.
6
#
3
@
0
1
8
5
7