Connection To The Limit Switch; Automatic Dispenser Connection - Project MDI80 Manual Del Usuario

All manuals and user guides at all-guides.com
GB
Page. 9
Connect the cold water inlet to the electric fan "D"
Connect the hot water inlet to the electric fan "E"
Refit the front panel and test the appliance as directed in Chapter 2.7
"Putting into service".
2.7

CONNECTION TO THE LIMIT SWITCH

Fit the limit switch (located on the machine side panel) on the outlet
table
2.8

AUTOMATIC DISPENSER CONNECTION

a) Installation of the surface active agent dispenser
Connect the surface active agent dispenser at the boiler intake pipe.
The electrical connection is made using the supplied terminals:
terminals 62 receive 230V power during the rinse cycle
b) Installation of the surface active agent dispensers
Fit the nozzle for adding detergent in the hole in the wash chamber
The electrical connection is made using the specific terminals:
Terminal 45 is supplied with 230 V voltage when the wash pump is
operating.