Final Operations - Project MDI80 Manual Del Usuario

GB
All manuals and user guides at all-guides.com
• Turn off the machine power using the main switch upstream from the
machine.
• Open the door
• Drain the water from the tank by lifting the overflow-pipe.
• Close the «rolling shutter valve» for the hydraulic connection.
• Remove the filters clean them under a water jet with a nylon brush.
• Pay attention not to let any dirtiness rests on the bottom of the drain
pump filter inside the tank. Clean the tank with a moderate water jet.
Wash outside surfaces when are cold with non-abrasive products
which are especially studied for steel maintenance.
REMARK: Do not wash the equipment with direct jet or at
another pressure because eventual infiltrations to the electric
components may harm the regular working of the equipment or
of the single safety systems, and penalty for this would be the
loss of guarantee.
4.4

FINAL OPERATIONS

Page. 17