Greenlee TPIR-J Manual De Instrucciones página 10

Specifications
Response Time: 1 second 95% response
Automatic Power Off: After 10 minutes of inactivity, the probe will automatically switch to
stand-by mode (the display will show ambient temperature). Restart unit by turning it OFF
and then ON again.
Repeatability: ±1% of reading or ±1 °C (±2 °F), whichever is greater.
Emissivity: Pre-set at 0.95
Spectral Response: 8 to 14 microns nominal
Output: Thermocouple Type J or K
Accuracy: ±2% of reading or ±2 °C (3 °F), whichever is greater, at 23 °C (73 °F) ambient
operating temperature
Temperature Range: –18 °C to 260 °C (0 °F to 500 °F)
Ambient/Operating Temperature Range: 0 °C to 65 °C (32 °F to 149 °F)*
Temperature Coefficient: ±0.2% of reading or ±0.2 °C (±0.3 °F), whichever is greater, per
degree change in ambient operating temperature from 23 °C (73 °F)
Relative Humidity: 0% to 95% (non-condensing)
Storage Conditions: –25 °C to 70 °C (–13 °F to 158 °F)*
Remove battery.
Battery: 9-Volt (NEDA 1604, JIS 006P or IEC 6F22)
* For improved accuracy, allow unit 20 minutes to adjust to a large change in temperature.
10
All manuals and user guides at all-guides.com