Hapro Seecret C25 Instrucciones Originales página 3

ENG
(original instructions)
Introduction
Congratulations on the purchase of your Hapro Seecret® anti-aging appliance! VDL Hapro B.V.
produces high quality products made with care and craftsmanship. The Hapro Seecret®
anti-aging appliances meet the same high standards. This product line has been developed
and assembled in accordance with strictest applicable standards and contains carefully
selected, high-quality components. Based on scientifically demonstrated principles, Hapro
Seecret® has been proven to vitalise and improve the healthy appearance of your skin in a
relaxing manner.
Before you begin using the appliance, it is recommended that you first read this instructions
and the accompanying brochure carefully. Among other things the documents contains
extensive information about the Seecret® anti-aging concept, it's influence on the skin and the
use of the appliance. With this information you will enjoy years of pleasure from your Hapro
Seecret® anti-aging appliance.
Important
● We request you when opening the packaging to always check the product for external
defects, imperfections or transport damage. Should it regrettably display defects or
omissions, please contact your dealer.
● Check if the voltage indicated on the appliance corresponds to the mains voltage in
your home before you connect the appliance.
● If the supply cord is damaged, it must be replaced by the manufacturer or service agent
or a similarly qualified person in order to avoid a hazard.
● Water and electricity are a dangerous combination! Do not use this appliance in wet
surroundings (e.g. in the bathroom or near a shower or swimming pool).
● If you have just been swimming or have just taken a shower, dry yourself thoroughly
before using the appliance.
● Children should be supervised to ensure that they do not play with the appliance.
● The appliance is not to be used by children or persons with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction.
● Always unplug the appliance after use.
● Let the appliance cool down for approx. 15 minutes before storing it.
● Make sure the vents of the appliance remain open during use.
● Colours may fade under the influence of the sun. The same effect may occur when using
this appliance.
● Protect your eyes during session using the goggles provided. Contact lenses and sun
glasses are not a substitute for the goggles.
● Do not use the appliance if the timer is defective.
Using the appliance
1 Place the appliance on a solid, flat and stable surface.
- The appliance can be placed in two positions: upright and tilted. (Fig. 1)
2 Fully unwind the mains cord.
3 Put the plug in the wall socket.
4 Consult the table to determine the appropriate duration of the session.
- 3 -