SYSTEM COMPONENTS
The patented Clorox® Total 360® Electrostatic Sprayer was
engineered with the end-user in mind. It is durable, highly
mobile and incredibly effective for electrostatic delivery.
The peristaltic pump is the only field-serviceable component.
If you are experiencing issues with your device, please contact
Clorox® Total 360® Technical Support at CloroxTotal360Support.com.
Clorox® Total 360® Base Unit
Air Compressor
1
2
Non-Marking Wheels
3
Sprayer Connect Line
4
Sprayer Holster
Handle Adjust
5
Buttons
6
Removable Drip Cup
7
Adjustable Handle
Peristaltic Pump
8
9
Circuit Breaker
10
Main Power
Switch
11
1-Gallon (3.8 Liters)
Product Containers
12
Extension Cord
Holder
13
Cord Management
Hook
14
Frame
15
Sprayer Electrical
Disconnect
Atomizes and propels the liquid.
Includes built-in auto-resetting
thermal safeguard against
compressor overheating.
Large wheels, for easy transport and
maneuverability, will not leave scuff
marks. Do not require inflation.
Connect line consists of three
components: electrical line, liquid line
and air line. The connect line connects
the sprayer to the base unit.
Holds the sprayer.
Adjusts handle height.
(Squeeze to adjust.)
Collects any dripping from the
sprayer.
Handle position is raised, lowered
and rotated by the two button snaps.
Provides liquid up to sprayer.
User resettable circuit breaker and
will only trip if a short occurs in the
base unit.
Powers system to a ready state.
Product containers
(not included with equipment).
Located at the rear of the unit for
extension cord storage.
Stores or hangs the extension cord.
Base casing designed for long-term
durability.
Electrical connection for sprayer.
Reservoir
16
17
Dispensing Cap
Clorox® Total 360® Sprayer
2
4
5
Sprayer Button
1
2
Main Control Panel
3
Nozzle Cover
4
Spray Wand Handle
5
Loom Assembly
A reservoir to ensure a consistent
liquid flow.
Allows solution to flow from the
bottle to the liquid line.
3
1
1-click functionality /
operates the sprayer/device.
Indicates the power, sprayer
and electrostatics are on.
Located on the front of the sprayer.
Handle positioned for ambidextrous
use.
Connect line consists of three
components: electrical line, liquid line
and air line.
EN
| 7