Carpet Height Adjustment; Tools; Select Proper Tool - Hoover WindTunnel MAX Instrucciones De Operación Y Servicio

HANDLE POSITIONS
2.6 The handle of your
cleaner has two
positions: 1) Upright for
storage and when using
cleaning

tools.

2)
Operating position for
general operation on
carpets and floors.
Step on handle release
pedal to lower handle.

CARPET HEIGHT ADJUSTMENT

2.8
Tools allow for cleaning surfaces above the floor and for reaching hard to clean areas.
The vacuum is ready for tool use when handle is in upright position.

SELECT PROPER TOOL

(Tools may vary per model)
3.1
A
C
D
All manuals and user guides at all-guides.com
2.6
1
2
A
3. TOOLS
B
7
TRANSPORTING CLEANER
2.7 To move your
cleaner from room to
room, put handle in
upright position, tilt
cleaner back on rear
wheels and push
forward.
2.8 To adjust height setting, PUSH DOWN and
TURN knob (A) to desired height setting.
For maximum cleaning performance, the following
carpet height settings are recommended:
where easier pushing effort is desired, while
maintaining good cleaning performance.
IMPORTANT
If the vacuum is difficult to push, push down and
turn knob to the next higher setting.
A. Use Dusting Brush to clean upholstered furniture,
draperies, mattresses, clothing, and carpeted stairs.
(Tool varies per model)
B. Air-Powered Hand Tool may be used for upholstered
furniture, draperies, mattresses, clothing, and
carpeted stairs. (Tool varies per model)
C. Telescoping Wand is used to give extra length
to your hose. Use it with any of the above tools.
D. Crevice Tool may be used in tight spaces,
corners and along edges in such places as
dresser drawers, upholstered furniture, stairs and
baseboards.
CAUTION
!
Not to be used for grooming a pet.
Actual model may vary from images shown.
2.7
!