Reset/Pairing - Jabra M5390 MULTIUSE Manual Del Usuario

9. Reset/Pairing

9.1
9.2
9.3
1 m/3 feet
Note: The headset is already paired with the base unit from the factory. Pairing should only be necessary if
1)
a new headset has to work with an existing base unit (or vice versa).
All manuals and user guides at all-guides.com
~ 3 sec.
~ 3 sec.
9.1 Under start-up, keep pressing
the Answer/End button for three
seconds. Alternatively, remove the
snap-on cover and press the reset
button on the headset for three
seconds.
Visual indicator on headset will
1)
light constant blue.
9.2 Then press reset button on
base unit for 3 seconds. Visual
indicator on base unit will light
constant blue.
9.3 Make sure headset and base
are within 1 m/3 feet of each
other. When pairing is successful,
both visual indicators will fl ash
blue 5 times, and the visual
indicator on base unit will turn
to steady green.
In order to clear the pairing list
in the base, press and hold the
reset button underneath the base
for 5 seconds. In order to clear
the pairing list in the headset,
press and hold the reset button
on the headset for 5 seconds.
Note that after resetting, a new
pairing sequence has to be
initiated.
15