amzchef AT7010S08 Manual De Instrucciones página 18

2.Turn the glass cover counterclockwise.(Figure 5)
3.Remove the light and replace it with the same type.(Figure 6)
4.After replacing the light, screw the glass cover clockwise.
The probe used in the oven is a mechanical physical probe. Do not replace it without authorization. In case of
abnormal temperature sensing of the sensor probe, please contact the designated repair shop immediately for
replacement.
Model
Voltage
Rated power
Upper Outer Ring Heat Pipe
Upper inner heating pipe
Lower heating tube
Rear heating tube
Rated frequency
Product size(width * depth * height)
Rated volume
Net weight
Gross weight
The standby power is about 0.5W when the power supply of the product is "off".
This marking indicates that this product should not be disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased. They can take this
product for environmental safe recycling.
he device meets the requirements of Regulation 2014/35/EU as well as the applicable
tandards EN 60335-1:2012 + A11:2014 + AC:2014 + A13:2017; EN 60335-2-6:2015; EN
233:2008
Manufacturer: Zhongshan Youlong Kitchen Appliances Co., LTD
Add.:
E-Gate Germany GmbH
EC REP
Marzahner Str. 34 D-13053 Berlin Germany
18
Sensor Probe Replacement
Specifications
AT7010S08
220-240V
2800W
1000W
1200W
1000W
1800W
50/60Hz
595(width）X565(depth）X595(height)
70L
27KG
30KG