Maintenance Table - GGP ITALY TC 102 Serie Manual Del Usuario

13. MAINTENANCE TABLE

Operation
MACHINE
Safety checks/check controls
Tyre pressure check
Check the rear/lateral discharge guards. Check the
grass catcher bag and lateral discharge chute.
General cleaning and inspection
Checking for any damage to the machine. If
necessary, contact the Authorised Service Centre.
Charging the battery
Complete bolt and screw check
Cutting means positioning and sharpening check
Transmission belt check
Cutting means control belt check
Brake regulation and check
Drive regulation and check
Cutting means gear and brake check
General lubrication
Replacing cutting means
Replacing the transmission belt
Replacing the cutting means control belt
ENGINE *
Checking/topping up fuel level
Check/top-up engine oil
Replacement of the engine oil
Air filter cleaning and check
Air filter replacement
Fuel filter check
Fuel filter replacement
Spark plug points cleaning and check
Replace the spark plug
* Consult the manual supplied with the engine for a complete list of maintenance operations and the
corresponding intervals
** At the first signs of any malfunction, contact your Dealer immediately
*** The operation must be carried out by your Dealer or a Authorised Service Centre
*** General lubrication of all joints should also be carried out whenever the machine is to be left unused
for a long period
All manuals and user guides at all-guides.com
First time
EN - 27
Interval (hours)
Subsequently every
Before each use
Before each use
Before each use
After each use
After each use
Before storage
25
25
25
25
25
25
25
25
100
-
-
Before each use
Before each use
*
*
*
*
*
*
*
Paragraph
/ Notes
par. 6.2
par. 6.1.3
par. 6.1.4
par. 7.6
-
par. 7.5
***
***
***
***
***
***
****
***
** / ***
** / ***
par 7.2
par 7.3
*
*
*
*
*
*
*