Barrette rdi collection FINYL LINE Manual Del Usuario página 4

5.
Attach uprights to both sides of the Decorative
Screen Panels. The bottom of the upright should
meet the bottom rail. Secure with #6 x 3/4" screws.
2 per upright (Fig. 4 & 5).
INSTALLING BOTTOM RAIL
6.
a. Place brackets onto both ends of bottom rail
(Fig. 6).
b. Slide bottom rail in between posts and rest on
top of 2" wood spacer blocks
c. Ensure bracket is centered to post. Then, using
1⁄ " drill bit, pre-drill first bottom bracket screw hole
8
through bracket hole and post (use the four outside
corner holes) (Fig. 7).
d. Drive the first #10 x 1½" screw through bottom
bracket into post.
e. Repeat steps c and d for the remaining three
screws for the first bottom bracket.
f. Repeat steps c, d and e for the second bottom
bracket.
INSTALLING TOP RAIL
7.
a. Place brackets onto both ends of top rail.
b. Align the route on the underside of the top rail
with the Decorative Screen Panel and depress it
onto the panel until it contacts the uprights.
4
A
DETAIL A
SCALE 1.5 : 1
A
DETAIL A
SCALE 1.5 : 1
Fig. 4
Fig. 5
Fig. 6
Fig. 7