Hazards In Use - Prexiso XL2 Manual Del Usuario

3.5 Areas of responsibility
Responsibilities of the manufacturer of the original
equipment:
Prexiso AG
Europastrasse 27
CH-8152 Glattbrugg
Internet: www.prexiso.com
Prexiso AG is responsible for supplying the product,
including the User Manual in a completely safe condi-
tion.
Prexiso AG is not responsible for third party accessories.
Responsibilities of the person in charge of the instru-
ment:
The person in charge of the instrument has the following
duties:
• To understand the safety instructions on the product
and the instructions in the User Manual.
• To be familiar with local safety regulations relating
to accident prevention.
3.6

Hazards in use

CAUTION:
Watch out for erroneous measurements if the instru-
ment is defective or if it has been dropped or has been
misused or modified. Carry out periodic test measure-
ments.
Particularly after the instrument has been subject to
10
All manuals and user guides at all-guides.com
abnormal use, and before, during and after important
measurements.
Refer to section "1.4 Accuracy check on auto
leveling".
WARNING:
Dispose of the product appropriately in accordance with
the national regulations in force in your country.
Always prevent access to the product by unauthorised
personnel.
Product specific treatment and waste management
information can be downloaded from the Prexiso AG
home page at: http://www.Prexiso.com/ or received
from the Prexiso dealer.
Flat batteries must not be disposed of with
household waste. Care for the environment
and take them to the collection points
provided in accordance with national or local
regulations.
The product must not be disposed of with the
household waste.
783114a en