Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Thermo Sensors Unit Appearance.
D1 : Outdoor Temperature
D2 : Transmission Indication LED
D3 : Battery Compartment
D4 : "°C/°F" button
D5 : Channel Selecting Switch
D6 : "TX" button data transmission
1-
First of all, remove batteries covers on unites backs with a screwdriver.
2-
Insert 2 AA size batteries on the main unit.
3-
Then insert 2 AA batteries on remote sensors.
4-
Insert all batteries between the terminals respecting the polarity indicated in the
compartment, and replace batteries covers.
Weather Forecast function:
I Automatically, when you insert or change main unit batteries, weather icon will flash during
10 seconds. Select the actual weather by pressing "+" or "-" buttons (B7/B8 on main unit's
back). Press "MODE" key to confirm.
I Or manually, press "+12/24" key during 3 seconds, the icon will flash, you can settle it.
Copyright © Lexibook 2007
All manuals and user guides at all-guides.com
BATTERY INSTALLATION
SETUP
5
Publicidad
Tabla de contenido
