I
NSTALLATION
D
I
ESKTOP
NSTALLATION
1. Plug the coiled cord into the handset. Plug the other end into the jack on the side of the base.
2. Place the handset in the base.
3. Plug the long telephone line cord into the LINE jack on the back of the phone. Plug the
other end into a wall jack.
4. Connect the small end of the power supply into the POWER 9V AC jack on the back of the
answerer. Plug the other end into an AC power outlet. The unit beeps once and is ready for
setup or to answer calls with the default greeting and settings.
4
NOTE: The phone automatically defaults to touch-tone dialing. To change to pulse
(rotary) dialing, see "Setting the Dialing Mode." If you don't know which type of service
you have, check with the phone company.
CAUTION: Only use the ATLINKS USA 5-2434 power supply that was packed
with this unit. Using other power supplies may damage the unit.
6
All manuals and user guides at all-guides.com
3
1
2