CASUALPLAY LIVI COT Instrucciones página 8

All manuals and user guides at all-guides.com
Fitting the LIVI COT on the pushchair
NOTE: The LIVI COT is only compatible with the LIVI
pushchair.
• Put the parking brake on and take the hood off the LIVI.
• Put the Backrest of the LIVI seat into its lowest position.
• Place the LIVI COT on the seat of the LIVI, placing the
foot end towards the handlebar (fig.01).
• Place the carrying handles of the LIVI COT at the sides
of the carrycot (fig.02).
NOTE: Take care with the carrying handles of the LIVI
COT. Make sure they are on the outside of the carrycot.
• The LIVI COT is fastened to the LIVI chassis using two
buckles found on the sides of the carrycot.
• Unfasten the buckle on one of the sides, put the strap
around the tube of the handlebar (fig.03) and fasten
the buckle (fig.04). It will click when correctly fastened
(fig.05).
• Do the same on the other side of the carrycot.
WARNING: Make sure that the two buckles of the carrycot
are correctly fastened before using the product.
Fitting the hood
• Place the hood on the carrycot and fasten the three
press studs to the sides (fig.06-07).
Maintenance
• Follow the washing instructions printed on the care label
sewn onto the fabric parts.
6