Millipore Microfil Manual De Uso página 14

10
Procedure,
continued
11. Pick up the membrane using flamed forceps held in your other hand.
12. Transfer the membrane to either a Petri dish filled with solid medium or a Petri-
Pad wetted with a suitable liquid medium.
NOTE: See the "Product Ordering Information" section for a list of available
media.
13. If no further filtration of the same sample is required, discard the funnel. If
further filtration is required, place a new membrane on the stainless steel
support by repeating steps 3 and 4, then replace the funnel on the support,
pressing on the upper rim until it snaps back into place. Repeat steps 7 to 13 as
required.
14. Transfer the Petri dish(es) to an incubator, membrane surface facing down.
www.millipore.com