MOB MO6233 Guia De Inicio Rapido página 2

MO6233
Delta Kite in Ripstop Polyester Pouch
EN
Parts Provided:
A. 1 x short stick
B. 2 x stick with end cover (side of the kite)
C. 2 x stick with plastic connector
D. 2 x connector
E. 2 x kite strings
How to assemble:
Step 1. Put the kite on a flat surface, with black connectors facing
upward
Step 2. Insert Part A into the connectors shown at Position (1) and
(2) in the diagram above
Step 3. Insert Part B. When Part B reaches the gap (Position 4),
thread Part D onto Part B. Part D should be in same direction as
the connector in Position1.Finally use the rubber band at the end
of the kite to fix Part B.