Dmx Linking - Chauvet Professional NEXUS 2x2 Guía De Referencia Rápida

EN
AC Power
Power Linking
Power Linking
Diagram
AC Plug
Replacing the
Fuse

DMX Linking

DMX Connection
Master/Slave
Connection
All manuals and user guides at all-guides.com
This product has an auto-ranging power supply that can work with an input
voltage range of 100 to 240 VAC, 50/60 Hz.
You can link up to 15 Nexus™ 2x2 products at 120 VAC or
28 at 230 VAC. Never exceed this number. Power linking cords can be
purchased separately.
Connection Wire (U.S.)
AC Live
AC Neutral
AC Ground Green/Yellow
1.
Disconnect this product from power.
2.
Using a flat-head screwdriver, unscrew the fuse holder cap from
the housing. (T2A 250V)
3.
Remove blown fuse and replace with a good fuse of the same type
and rating.
4.
Screw the fuse holder cap back in place and reconnect power.
The Nexus™ 2x2 will work with a DMX controller using a regular DMX
serial connection. A DMX Primer is available from www.chauvetpro.com.
The Nexus™ 2x2 uses a regular DMX data for its DMX personalities:
3, 5, 9, 12, and 17. See the User Manual to connect and configure for DMX
operation.
The Nexus™ 2x2 uses the DMX data connection for its Master/Slave
mode. See the User Manual to connect and configure for Master/Slave
operation.
Wire (Europe)
Black Brown
White Blue
Green/Yellow
3
Nexus™ 2x2 QRG
Screw Color
Yellow/Brass
Silver
Green