WL-320gE Access Point Quick Start Guide
6) Quick Setup in Access Point mode
1.. Click. Next. to. enter. the. Quick. Setup.
page..Follow.the.instructions.to.set.up.
the.ASUS.Access.Point.
2.. Set. mode. to. AP. or. WDS(Bridge),.
Station(Client).or.URE(Repeater).
3.. Setting. up. your. wireless. interface..
Specify. to. your. wireless. router. an.
SSID (Service Set Identifier), which is
a unique identifier attached to packets
s e n t. o v e r. W L A N .. T h i s. i d e n t i f i e r.
emulates. a. password. when. a. device.
attempts. to. communicate. with. your.
wireless.router.via.WLAN..
.
If.you.want.to.protect.transmitted.data,.
proceed. to. steps. 4. and. 5.. Otherwise,.
go.to.step.6.
4.. Select. a. Security Level. to. enable.
encryption.methods..
Medium: Only. users. with. the. same. WEP.
key. settings. can. connect. to. your. wireless.
router.and.transmit.data.using.64bits.or.128bits.WEP.key.encryption..
High: Only.users.with.the.same.WPA.pre-shared.key.settings.can.connect.to.your.wireless.
router.and.transmit.data.using.TKIP.encryption.
5.. Input.one.set.of.WEP.keys.in.the.WEP.
Key. fields. (10. hexadecimal. digits. for.
WEP.64bits,.26.hexadecimal.digits.for.
WEP. 128bits),. and. then. select. from.
Key.Index.accordingly.
.
You. can. also. let. the. system. generate.
the. keys. by. inputting. a. Passphrase..
Record. the. Passphrase. and. the.
WEP. keys. in. your. notebook,. then.
select. from. Key. Index. accordingly..
Click. Finish. to. enable. your. setting..
For. example,. if. we. input. 11111. as.
the. Passphrase,. the. WEP. Keys. are.
generated.automatically..
6.. Click. Save&Restart. to. restart. the.
wireless.router.and.activate.the.new.settings.
2