Creative Live Motion Manual Del Usuario página 4

All manuals and user guides at all-guides.com
CLI_WCam Live! Motion_QS.book Page 2 Tuesday, June 28, 2005 11:43 AM
1
1
Installing Your Webcam
You need to install device drivers and applications before using your webcam.
Do not connect your webcam to your computer before installing the drivers.
If you accidentally begin installation with your webcam connected and the Add New
Hardware Wizard or Found New Hardware Wizard dialog box appears, click the
Cancel button.
1. Insert the Installation CD into your CD-ROM drive. Your CD should start
automatically. If it does not, follow the steps below:
i. Start Windows Explorer.
ii. On the left pane, click the My Computer icon.
iii. Right-click the CD-ROM/DVD-ROM drive icon, and then click Autoplay.
2. Select the region you are in and then click the Next button.
3. Select a language and then click the Next
button.
4. Click the options for installing drivers and
applications, and then click the Install
button.
5. Place your webcam on top of your computer
monitor or other flat surface. For LCD flat
panel monitors or notebook computers, use
the integrated hinged lever to balance the
camera (see Figure 1).
6. Connect the headset to your computer's
microphone and headphone connectors. Refer to your computer or audio card
documentation for the microphone and headphone connectors.
2
Figure 1