Creative Live Motion Manual Del Usuario página 5

All manuals and user guides at all-guides.com
CLI_WCam Live! Motion_QS.book Page 3 Tuesday, June 28, 2005 11:43 AM
7. When prompted, connect your webcam's
USB cable to an available USB port on
your computer (see Figure 2). Windows
automatically detects the device.
In the rare event that your webcam is not
recognized, and a "USB Device Not
Recognized" message appears on your
computer screen, disconnect your
webcam and reconnect it to a USB port at
the back of your computer.
Do not connect your Creative WebCam Live! Motion to your computer with an
extension cable.
8. To complete the installation, follow the appropriate steps below:
For Windows XP
When the Found New Hardware Wizard dialog box appears, select Install the software
automatically (Recommended), and then click the Next button.
For Windows 2000
When a Digital Signature Not Found dialog box appears, telling you that Creative WebCam
Live! Motion has been detected, click the Yes button.
9. You may be asked, after the drivers have been successfully installed, if you want to
restart your computer. Select No until all the applications are installed.
®
USB port
Figure 2
3