GB
Manual instruction
Dear Customer,
With the purchase of this GENIE paper shredder you have selected a high quality technical
device which has been manufactured using the latest engineering processes and with
reliable, leading-edge electrical and electronic parts. Please take a few minutes to read the
following operating instructions before switching on and using this device.
Many thanks for your attention. We hope you enjoy your new paper shredder 500 SB!
Cautions:
1. Always be sure to keep all loose objects such as e.g. clothing, ties, jewelers, hair and all
other small objects away from the feed slot in order to avoid injury.
2. Disconnect the mains plug in the event the document shredder is not be used for a longer
period of time.
3. Remove all paper clips and staples before inserting the paper.
4. Always be sure to keep your fingers and hands away from the feed slot in order to avoid
serious injury.
5. The continuous shredding operation may not longer than 2 minutes at last. Should it be
necessary to operate the device continually, it is recommended that each shredding
operation be limited to 2 minuets.
6. The device should be setup as close as possible to an easily accessible wall socket.
7. The document shredder must always be deactivated and disconnected form the electrical
line prior to moving, transporting and cleaning the device and prior to emptying the waste
basket.
8. Empty the waste basket frequently. Otherwise the shredder may jam. Please disconnect
the main s plug in order to empty the basket.
9. Please do not leave the document shredder unattended e.g. in the event that children or
pets are nearby.
10. The document shredder is only suitable for shredding paper, please don not insert any
other materials, the paper must be dry and clean.
11. Never open the casing. In the event of problems with the device, please contact our hotline.
12. The device may not be operated with a damaged power cord.
All manuals and user guides at all-guides.com
- 7 -