Printer Menu - Seiko I Infotech Inc SII IP-7700 Guia De Inicio Rapido

MEDIA REG MENU
#REMAINING MEDIA
>XX:YYYm
#DELETE MEDIA
>02:TYPE02 OK?
#COPY MEDIA
>XX
#PASTE MEDIA
>01 02*
M.ADV MENU
Menu
#MEDIA ADV PRINT
>ROUGH(NORMAL1)
#MEDIA ADV VALUE
#XXXXXX >099.81%
#BACK ADJ PRINT
>NORMAL
#BACK ADJ VAL
#XXXXXX>+0000P
REWIND MENU
Menu
REWINDING MEDIA
PH.REC MENU
Menu
#PH RECOVERY
>NORMAL
FORM FEED MENU
Menu
FEEDING MEDIA
PH.MAIN MENU
Menu
#CAP CLEANING
>
#INK SYSTEM OPT
>STORE INK SYS
#COLOR CHANGE (8->4)
>
#RESEAT PRINTHEAD
>
#WASH PRINTHEADS
>

PRINTER MENU

Menu
#CONFIG PRINT
>
#ERROR LOG PRINT
>
#HISTORY PRINT
>
64
Set the remaining media. When the remaining media is set beforehand, you can check the remaining
media (by subtracting the printed length) in the MEDIA MENU.
Delete the registered media. No. 01 to 20 of registered media can be selected.
Select the media number of copy source. Use this menu to copy the media information (parameters) of
the registered media to other media. Designate the copy destination in [PASTE MEDIA].
Select the media number of copy destination.
To determine the media advance value, print the media advance correction pattern.
Adjust the media advance value. Enter a media advance value based on the media advance correction
pattern print result.
When making the media back adjustment (when PH CLEANING [DURING PRINT] is selected), print the
media back correction pattern. Select the parameters to meet the respective print mode.
Set the back adjust value of the media. Enter a media back value based on the media back correction
pattern print result.
While you keep pressing the
This menu is used to clean the print head of the printer. Press the
the print head.
While you keep pressing the
printer ejects the media.)
The carriage moves to the maintenance area so that the capping unit can be cleaned periodically.
Execute the service (cleaning) operation.
Used to change the printer mode from 8-color mode to 4-color mode or from 4-color mode to 8-color
mode.
Used to check the print head.
To prevent the nozzle from clogging, this function is provided to fill the cap with ink so that the print
head (nozzle surface) is soaked in the ink.
Used to print the printer information and operation panel setting information.
Used to print the error log information saved in the printer.
Used to print the ink system cleaning status and the print head replacement log saved in the printer.
Outline of functions
Outline of functions
key, the printer rewinds media.
Outline of functions
Outline of functions
key, the printer feeds media. (When cut-sheet media is used, the
Outline of functions
Outline of functions
key to enter PH.REC MENU for