Security Measures; Front Panel - Ferguson ARIVA T30 Manual De Uso

EN

Security measures

• Please read the user manual and its rec-
ommendations carefully.
• Please read the manual carefully before
starting the equipment for the first time.
• To avoid electric shock, never open the
housing. Damage to the warranty seal
will void the warranty.
• Disconnect the device from the mains
during lightning storms or when it is
not going to be used for a long time.
Remember that the warranty does not
cover damage to the device caused by
a lightning strike.
• Do not expose the device to direct sun-
light. Keep away from heat sources and
from humid environments. Do not block
the ventilation openings to ensure prop-
er air circulation.
• Place the device in a horizontal position
on a flat, even and stable surface.
• If you move the device from a warm to
a cold room and vice versa, wait at least
1 hour before powering up. Failure to do
so may cause problems.
• Keep the device away from vases, bot-
tles, aquariums and other water sources
in order to avoid damaging the device.
Do not touch the power plug with bare
hands.
• Do not place any objects on the housing
of the device. Before starting any main-
tenance or installation work, disconnect
the device from the power supply.
• Do not use alcohol or liquids containing
ammonia to clean the device. If neces-
sary, clean it with a soft, lint-free cloth
moistened with a mild soap and water
solution.
• Do not connect any cables when the
power plug is in the socket.
• Check if you have working cables. Dam-
aged cables can cause a fire.
• Please disconnect the device from the
power supply while making the connec-
tions.
Contents of the package
Before installing the product, check that
you have the following items:
• 1 x DVB-T2 Decoder
• 1 x Remote Control
• 1 x User Manual
• 1 x AAA Battery

Front panel

1. USB 2.0 port: Data input from USB me-
mory devices.
2. LED display window: View the channel
number.
3. CH+/CH-: To change channels without
using the remote control.
4. Power button: Turns the main power
on/off.
Rear panel
1. RF IN: This jack connects to an external
antenna.
2. HDMI: High definition audio and video
output used for connection to an HDMI
device.
3. TV SCART: This jack connects to your
TV.
4. LAN: Ethernet port.
5. Power cable.
Connecting to a TV
• Connect the receiver to a TV using one
of the Video ports. For the best picture
quality, use the HDMI port.
• Connect the terrestrial TV antenna to
the RF IN port on the receiver.
1 2 3 4
1 2 3 4 5
EN