Sunny SF-E3903 Manual Del Usuario página 19

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-
907-8669).
STEP 3:
Attach 2 Sleeves (No. 43) and 2 Corrugated
Washers (No. 44) onto Handlebar Post (No.
42).
Attach Left Swing Rod (No. 28L) and Right
Swing Rod (No. 28R) to Handlebar Post (No.
42) with 2 Hex Bolts (No. 29), 2 Spring
Washers (No. 30) and 2 Washers (No. 31).
Tighten and secure with 2 Spanners (No. C),
then cover with 2 Sphere Caps (No. 24).
Lock Left Connecting Rod (No. 15L) to the
left side of Crank (No. 58) with 1 Left Crank
Bolt (No. 8L), 1 Corrugated Washer (No. 9),
1 Spring Washer (No. 11) and 1 Left Nylon
Nut (No. 12L). Tighten and secure with Allen
Wrench (No. B) and Spanner (No. D). Then,
cover with 2 Sphere Caps (No. 24) and 1
Fig. B
Sphere Cap (No. 13).
Lock Right Connecting Rod (No. 15R) to the
right side of Crank (No. 58) with 1 Right Crank
Bolt (No. 8R), 1 Corrugated Washer (No. 9),
1 Spring Washer (No. 11) and 1 Right Nylon
Nut (No. 12R). Tighten and secure with Allen
Wrench (No. B) and Spanner (No. D). Then,
cover with 2 Sphere Caps (No. 24) and 1
Fig. A
Sphere Cap (No. 13).
NOTE: Make sure to turn Left Crank Bolt (No.
8L) counter-clockwise, Right Crank Bolt
(No. 8R) clockwise, Left Nylon Nut (No. 12L)
clockwise, and Right Nylon Nut (No. 12R)
counter-clockwise.
procedures may result in permanent damage
to your elliptical bike.
18
(See Fig. B)
(See Fig. A)
Failure to follow