Wifi Usage Mode; Uvc Mode Use; Guide To Time-Lapse Photography; Indicator And Operating Conditions - SVBONY SC001 Manual Del Usuario

Tabla de contenido

Publicidad

WiFi usage mode

1.Device preparation
Take out the device, connect the external antenna, and take off the lens cover. If the TF card is not installed,
please install the TF card first, then connect it in the correct direction and fix it on your spotting scope or other
external equipment and make sure that it is firmly fixed.
2. Establish a connection with the device
2.1 Android phones: Press the power button to turn on the device, open the installed app in the phone, and enter
the main interface of the app. Click "Device is not connected" at the top of the main interface of the APP to enter
the Wi-Fi selection list, select SC001-XXXXXX (X represents a different serial number for each device), then
enter the password "12345678" in the pop-up prompt box and click to connect. When the connected WiFi name
in the WiFi list shows SC001-XXXXXX (there will be "No Internet access", this is normal), it means that the
device is connected successfully.
2.2 iPhone: Press the power button to turn on the device, open the installed app in the phone, and enter the main
interface of the app. Click "Device is not connected" at the top of the main interface of the app to enter the
permission settings, then click the return arrow in the upper left corner to enter the Wi-Fi selection list and select
SC001-XXXXXX (X means different serial number for each device).
"12345678" in the pop-up prompt box and click to connect. When the connected WiFi name in the WiFi list shows
SC001-XXXXXX (there will be "No Internet access", this is normal), it means that the device is connected
successfully.
3.Return to the main interface of the APP, click "Enter Device" to see the image and you can use it normally.
Notice:a) If the purchased TF card is used for the first time, you should enter the setting options first, format the
TF card, and prepare for the subsequent shooting and storage of images;
b) Please shut down the device before inserting or pulling out the TF card;
c) Please allow the APP to access the local photo album in your phone. The program will automatically create a
new photo album named "Svbony Camera" in your local photo album to store the images that you downloaded
from the device photo album to the local photo album.
d) If the image is not clear, please adjust the focus of the external device until the image is clear.

UVC mode use

1.Take out the device, connect the external antenna, remove the lens cap, install the TF card, and connect your
spotting scope or other external devices;
2.Use the built-in data cable, connect the Type-C port to the device, and connect the USB port to the PC;
3.Open the UVC mode software on the PC (Amcap software can be used), select UVC CAMERA, and enter the
image interface.
Note: In the process of using WIFI mode, after switching to UVC mode, the device will automatically default to
UVC mode. If you want to return to WIFI mode, you need to unplug the data cable connection and then
reconnect the device to return to WIFI mode.

Guide to time-lapse photography

1.On the main interface, press the planned photo button to switch to the planned photo mode;
2.Click the icon in the upper right corner of the interface
take(50, 100, 200 is available);
3.Click on the icon
Select the time interval of each shot(3 seconds, 5 seconds, 10 seconds is available);
4.After the above settings are selected, return to the main interface and press the camera button. The device will
automatically take pictures at a fixed time according to the selected time and the interval between photos until the
selected number of photos has been taken;
5.Export the taken pictures, through the video synthesis software, you can make time-lapse photography videos.

Indicator and operating conditions

Operating conditions
Turn on ( Press the power button for 5 seconds and
then release it)
Shut down (Press the power button for 5 seconds
and then release it)
External power supply (via mobile power or PC, etc.)
Fully charged battery
Preview and take pictures (plan to take pictures)
Shoot video
Choose the number of photos that you plan to
Light indicator
Blue light is on
Blue light off
Red light is on
Red light off
Blue light is on
Blue light flashing
3
After that, enter the password

Publicidad

Tabla de contenido
loading

Tabla de contenido