Safety Instructions - HSM ProfiPack 425 Instrucciones De Servicio

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
http://www.monomachines.com/
1 Proper use, warranty
The Profi Pack 425 is intended exclusively
for the manufacture of packing cushions
from cardboard packaging.
We provide a one year warranty for the
machine. The warranty period is 6 months
when used in multiple shifts. This warranty
excludes wear, damage due to improper
handling, natural depreciation, and actions
taken by third parties.

2 Safety instructions

Read the operating instruc-
tions before switching on the
document shredder. Save these
instructions for later use. Follow
all warnings and instructions
marked on the product!
Risk of injury!
Do not reach into the paper
feed slot.
Risk of injury from being
pulled in!
Keep long hair, loose articles
of clothing, ties, scarves, jewel-
lery, etc. away from feed open-
ing. Material with the tendency
to form loops, e.g. tapes, strap-
ping material, etc. must not be
processed.
Keep product out of the reach
of children. The Profi Pack 425
should be operated only with an
operator in attendance.
If there is damage or the de-
vice is not functioning properly,
switch it off, pull out the plug
from the mains and call cus-
tomer service.
04/2013
http://www.monomachines.com/
All manuals and user guides at all-guides.com
• Take care that the mains plug can be
• Before plugging in the mains plug, check
• Make sure no liquid is spilled on or in the
• The device must not be set up near a
• The ventilation slots must not be blocked
• Transportation equipment (e.g. pallet
• When moving the machine, note that it
• The machine may only be placed in dry
• Observe the instructions for unpacking.
Profi Pack 425
english
Service work may only be car-
ried out by HSM Customer
Service or by the service tech-
nicians of our contractual part-
ners.
reached easily.
that the the voltage and frequency of your
mains supply are in accordance with the
specifi cations on the type plate.
device.
heating element or another source of
warmth.
or covered and there must be at least
5 cm space between the device and any
wall or furniture.
3 Transportation, installation
trucks) must be suitable for a machine
weight of 170 kg.
may topple over.
rooms on a hard, level fl oor – not on car-
pets. The fl oor load on each roller is ap-
proximately 45 kg.
7

Publicidad

Tabla de contenido
loading

Tabla de contenido