Jette JOLINO Manual Del Usuario página 10

All manuals and user guides at all-guides.com
GB
Setting up:
First open the transportation bag (fig. 1a) and remove the stroller (fig. 1b).
Open the two couplings at the tube slider (fig. 1c) as well as at the rear
wheels (fig. 1d) and fold them out.
Unhinge the safety latch (fig. 1e) and pull the push handle all the way up
until the stroller is set up straight. Then push the locking down (fig. 1f).
Assembly of the wheels:
Push the front wheels onto the wheel suspension of the frame until you can
hear it locking in place (fig. 2a).
To remove the wheels press both pegs on the bottom side of the wheel sus-
pension and take off the wheel (fig. 2b).
To activate or deactivate the swiveling function of the wheels, push the
plastic clip upwards or downwards (fig. 2c).
Applying the break:
In order to apply the break, press both break levers down (fig. 3a). In order to
release the break, press both break leavers upwards (fig. 3b).
WARNING: Please only apply the break using the purpose built break lever
on the right hand side of the wheel.
Safety belt:
In order to put on the safety belt, attach both belt clasps (A + B) on the
middle belt (C). In order to open the safety belt, press the side clips at the
same time and pull the belt clasps apart (fig. 4).
In order to be able to provide maximum safety for your child, adjust the
length of the belt to your child. The length of the belt should be adjusted in
a manner that the belt is resting tightly against your child.
Adjusting the back rest:
You can adjust the back rest to a seating or resting position by means of the
belt fastener, by adjusting the length of the belt when pushing both buttons
(fig. 5).